Members Only

It is very important that you keep your contact details up to date so as we can contact you if we need to, but more importantly so you ...

Modifying a car is about personal taste and there are three areas of focus. One is pleasing the eye, two is damaging the eardrum, and three is getting through that favourite corner as quickly as possible. A lucky few can afford all three, but ...

Firstly I must apologise for the lack of pictures on how to do this. I did this a while back on my 205 XS, so I'm writing this from memory (and I wrote this back in 2001)!

OK, firstly here's a picture of how the end result looks:



Ingredients:

Fibreglass boot panel: £25 from Autofive

205 Central locking boot solinoid: £5 from a breakers

Speaker wire: 15p per metre

205 Electric window switch: £3 from a breaker

Coathanger: From my wifes wardrobe

Spade Connectors (Male and female): 5p each

Body Filler and Metal Gauze

Sandpaper

Metal plate

Paint

Multimeter / Test Light

Recipe: ...

The months of design work, the weeks of assembly and the hours of fine-tuning all seem a long way from the celebrations o*n the finish ramp. Yet without them... Peugeot Sport lifts the veil to give an exclusive glimpse of the secrets behind the creation of the 307 World Rally Car.

Lego-Time, Anyone?
Photo Courtesy of WAKE UPP / G Planchenault - D Goubet. Peugeot.

It takes 45 days to prepare a WRC.

There's no question of just strolling into the workshops at V�lizy. You'll have to prove your identity and show your pass first. o*nly when the formalities are completed do the doors to Peugeot Sport finally open. It's ...

Many people ask what wheels from other Peugeots can fit their model. This all comes down to offset and rim width really, as well as the physical constraints like will it catch the suspension / body etc. Below is some reseach I have done into the 4 stud Peugeot wheels over recent years. All of these have the 4x108 PCD (Pitch Circle Diameter) which is basically the stud pattern. Fords also share this PCD but their offset is much shallower so you would need to run spacers on ...